SIEMENS FDCIO223

Product Features

For connection of collective fire detectors (GMT/conventional line, GMT/conventional line with shunt Zener diode barrier (SB3) for explosion-hazardous areas).

For monitored controls eg. smoke dampers, alarm devices, door magnets and fire extinguishing activation devices (follow country specific instructions).

Status and alarm messages or monitored signal input to confirm technical status.

The 2 inputs/outputs can be independently parameterized as inputs in each case as a collective of detector line, contact input, control output, control output and confirmation with selectable monitoring time frame.

Status indication with LED.

2 Transzorb diodes 20 V including transponder, 8 resistors and 2 mounting feet for TS35 U-rail.

Technicial Specifications

Operating temperature -25…60 °C
Standard CEA GEI I-084 , EN 54-13 , EN 54-17 , EN 54-18
Power supply External input voltage DC 18...32 V
Protection category IP30; IP65 with ext. Housing
Relative humidity ≤85 % rel.
Operating voltage FDnet/C-NET DC 12…33 V
EOL resistor 3.3 kΩ/680 Ω, 2.7 kΩ/560 Ω, 3.3 kΩ
Storage temperature -30...+65 °C
Cable capacity 0.2...1.5 mm2 (2.5 mm2)
Control output DC 24 V ± 5 % / 2x 1 A or 1x 1.5 A
System compatibility FDnet -> FS20, AlgoRex, SIGMASYS C-NET -> FS720
Communication protocol FDnet/C-NET
Detector line Collective GMT Siemens/Cerberus, Synova conventional/SynoLINE300, collective/SynoLINE600 or similar
Dimensions (W x H x D) 132 x 90 x 24 mm
Color Pure white, RAL 9010
Accessories TS35_122 U-rail , TS35_288 U-rail , FDCH221 Housing IP65