KAREL

The system structure, which can have 1056 TDM and 1000 IP lines in the basic configuration of IPG1000, can grow up to 64000 lines in total. By expanding the server capacity, it is possible to increase the IP subscriber capacity up to 250,000 lines and the SIP trunk capacity up to 6,000 lines simultaneously. IPG500 is a system that can grow up to 112 TDM and 500 IP lines.

Since the IPG Communication Platform can be used as a software-only solution, it can be run on any server compatible with the Linux Suse operating system. Although the server features vary according to the required capacity, you can have a system with 1000 IP subscribers with a 600MHz single-core processor and a server with 1GB Ram capacity.

IPG Communication Platform supports up-to-date SIP and H323 protocols at a level that can offer many flexible services to its users. Its flexible and open-to-development software structure allows users to perform many web-based operations that they increasingly need, automatically answering incoming calls (IVR), voice recording (VR), voice mail boxes (VM), sending voice messages via e-mail. (VM2EM), instant messaging (IM), instant status information (Presence) monitoring, Microsoft Outlook© integration, such as many unified communication features.

The entire system structure is programmed and managed through the web server on the server. Thanks to the web infrastructure, the system can be easily programmed, managed and personalized both closely and remotely.

Thanks to the system’s RTP proxy feature, it allows easy and fast remote IP subscriber use without the need for port forwarding and VPN structures for use behind NAT.

HARDWARE FEATURES

With its 19” cabinet structure, the IPG Communication Platform does not require additional cabinets and investments, and can be used in standard system cabinets. The fact that the cards used in the system have a power circuit on their own provides power efficiency, while providing a much more resistant structure against power regime deviations that may come from the outside world. Both FSK and DTMF can be detected/generated without the need for an additional card for Caller ID.

DISTRIBUTED AND CENTRALIZED CONFIGURATION

IPCC Structure: Systems in all locations with an IP network can be used in a single system structure. In this structure, the system runs on hardware-based servers or virtual servers. It can work without the need for a server in systems up to 3 towers. The systems in all units communicate with the central server over the IP network and work as the towers of the system. In case of a problem in the connection between the center and the tower, the tower works as a system on its own and when the problem is resolved, it communicates with the center again and joins the body of a single system.
Thanks to this structure, geographical redundancy and continuity are supported. Gateway modules of both IPG1000 and IPG500 systems can be used when configuring towers. In IPCC structure, inter-center conversations can be encrypted. The IPG Series can be expanded in a single system structure by connecting to each other only via the Ethernet infrastructure with the IPCC structure, and this growth can be realized independently of the distance.

Suitable for Fiberoptic Infrastructure: With the integrated Fiber Optic Card in the IPG Communication Platform, the fiber optic network can be terminated directly on the system. In this way, there is no need to use a fiber switching device and to be fed with a battery or UPS.

Integrated Features with VRC CARD: Integrated voice recording, IVR, voice message recording and Voice Mail (voice mail sending) are embedded in the hardware and software of the VRC card. These features are optionally available depending on your needs. You can have 16-channel voice recording and 16-channel IVR features by activating only with a VRC license, without the need for additional equipment, whenever you want. In cases where more channels are needed, additional VRC card and license should be added. With the VRC card, embedded call recording and IVR are provided in the IPG Communication Platform. System and robot operator messages can be read, voice messages can be left to subscribers and messages can be listened to. Calls of subscribers and external lines can be recorded. Recorded conversations and messages can be sent as e-mail or, if preferred, stored on the system or in an external environment. Call records can be tracked and reported with WebCM.

FULLY INTEGRATED GATEWAY STRUCTURE

One of the most important features that makes the IPG Communication Platform different is its integrated media gateway structure. The IPG1000 gateway structure allows the system to connect with the TDM network over many different interfaces. Since this structure includes many different technologies used from the past to the present, it allows the system to be configured in a hybrid structure. In this way, users do not have to change all their old network components at once in order to benefit from IP communication opportunities, and they have the opportunity to gradually move the technology they use to the IP platform. The gateway structure of the IPG1000 Communication Platform is fully modular, allowing the system’s TDM capacity to grow from 16 lines to 64000 lines. This structure, which allows the use of exactly the same modules from the lowest capacity to the highest capacity, provides the opportunity to reach large capacities with minimum cost for institutions and organizations in need.

TELEPHONE EXCHANGE REMOTE MODULE

Telephone Exchange Remote Module with Flexible Capacity Options that Can Expand From 8 Ports to 256 Ports
Full Integration with Fiber Optic Cable Infrastructure Between System Room and Rack Cabinets (Between Floors)
Full Integration with Fiber Optic Cable Infrastructure Between Blocks and Buildings
Full Integration with Fiber Optic Cable Applications Installed Outside the Building (Remote Campus Applications)
Fiber Optic Termination Card Integrated into Telephone Exchange Remote Module (One Fiber Optic Cable Entry + 4 CATx Cable Outputs)
FXS and FXO Module Support
CID Support
Distributed Power Plant Structure
Geo-Redundancy Support
Web Configuration Support
Battery and UPS Connection Support
IPG series VoIP gateway works with standard SIP protocol and is compatible with most of SIP based IPPBX and network platform
Primary and secondary SIP account
Flexible port group setting
IP trunking
Flexible routing and manipulation
Data/Voice/VLAN Management
Audio/Fax/Modem
SNMP
Automatic software/configuration update