fire detection
The advantages of technology come to the fore in order to survive fires that can cause serious damage, loss of life and property with minimum damage. Nowadays, it can be very difficult to be aware of the fires that may occur due to the widespread use of multi-storey buildings. Because fires can start in unused areas as well as living areas. In order to be protected from fire, fire detection technologies draw attention. This system, which analyzes gas and smoke with special sensors, can warn every person in the building in case of fire. These technologies can be used in many areas such as homes, hospitals, schools and workplaces.
Fire Detection Systems
Fire detection technologies, which give the first chance to respond to the fire and extinguish it before it grows, add value to human life. It provides a safe environment and attracts everyone’s attention with its easy use. The system, which is used together with the fire alarm unit, is supported by different equipment. It basically consists of various alarm detectors, flashers and buttons.
The fire detection system sends the information it receives via cable connections to the main panel. It is transmitted to the control panel by exchanging information between the detector and the system cable. Ceiling mounted heat and temperature rise detectors give a warning with audible alarms in case of a leak. Users can monitor the received information from the panel. It should be applied to an area of sufficient width to get the best efficiency from the system.
What are the Benefits of Fire Detection Systems?
The fire detection system can convey to users where a fire has come from. In this way, you can go to the fire area quickly and get through the event with the least damage. For maximum protection, the system must be integrated into the building areas by experts. The most efficient settlement should be preferred by revealing the area width, intervention distance and risky places.
After a good layout is made, a specialist should be appointed to work on the fire panel. In this way, you can provide communication quickly. It helps you get a quick and safe reaction, especially in areas where many people live, such as public buildings, hospitals and schools. Fire detection technologies with sensitive sensors provide the opportunity to end the fire before it starts.
How Does the Fire Detection System Work?
The fire panel, which is the control center of the fire alarm system, analyzes the information received from the detectors. It announces the occurrence of the fire to everyone via flashers, telephone dialers and sirens. The fire detection system, which has one battery, can continue to work in a possible power cut. It is used with a key to prevent outside interference.
The heat detector, which detects smoke, soot and other particles during a fire, is a sensitive device. The heat detector, on the other hand, sends a signal to the panel when the temperature exceeds a certain level during fire detection. The fire alarm siren alerts the occupants of the building at the time of fire, and ensures that precautions are taken. In addition, the fire alarm button, which allows the fire to be reported manually, is also very important.
How Far Are Fire Detection Systems Separated?
There are two types of fire detection systems called conventional and addressable. The biggest advantage of the conventional fire detection system is detecting the area of the fire. However, it is not known from which detector the notification came. It gives the chance to place up to 20 detectors for a zone to be used. It is generally used in small areas and the installation cost is low. More than one detector can be added to a zone. Each floor can be used as a zone.
In the addressable fire detection system, fire alarm is received directly from the detector. Since it is a highly advanced system, it provides the opportunity to respond quickly to the fire. Each detector connected to the panel has a unique address. They constantly communicate with the panel through this address. Being able to be controlled by computer or smart devices provides an advantage in terms of usage.